Vaporesso Armour Max Vape Kit - iTank T Version

Vaporesso Armour Max Vape Kit - iTank T Version

The Vaporesso Armour Max Vape Kit - iTank T Version is a high-power dual-battery vape kit designed for adult vapers who want advanced control, strong DTL performance and a durable mod and tank combination. Available from The British Vapes, the Armour Max delivers up to 220W of adjustable power and supports two external 21700 or 18650 batteries.

Paired with the Vaporesso iTank T, this kit combines a top-fill design, adjustable top airflow, GTi mesh coils and a protective TPU exterior. The iTank T is designed to reduce leakage while providing the airflow and vapour production expected from a high-wattage sub-ohm vape kit.

• Up to 220W adjustable output
• Requires two external 21700 or 18650 batteries
• Batteries sold separately
• Vaporesso iTank T included
• Top airflow and top-fill design
• GTi 0.2Ω and 0.4Ω mesh coils included
• GTi coil compatible
• AXON chipset
• F(t), Pulse, Eco and temperature control modes
• 0.96-inch TFT colour display
• USB Type-C charging
• Protective TPU armour design
• Uni-Lock battery safety system

Why Choose the Vaporesso Armour Max Vape Kit?

Powerful 220W Output

The Vaporesso Armour Max provides adjustable output from 5W to 220W. This gives experienced vapers the flexibility to fine-tune the device for different GTi coils, e-liquids and DTL vaping preferences.

Lower wattage settings can provide a cooler and more controlled vape, while higher settings can produce a warmer vape with greater vapour production. Always use the wattage range printed on the installed coil and increase the power gradually.

Dual 21700 or 18650 Battery Support

The Armour Max uses two external batteries and supports both 21700 and 18650 cells. Dual 21700 batteries can provide strong power and battery capacity, while 18650 batteries can be used with the supplied adapter sleeves.

Batteries are not included with the kit. Use two matched batteries with the same brand, model, age and charge level. Never mix different batteries or use cells with damaged wraps.

External batteries require careful handling. Inspect the battery wraps before use, keep spare batteries in a protective case and follow the safety instructions supplied with the device.

Vaporesso AXON Chipset

The AXON chipset provides the control system behind the Armour Max. It supports adjustable wattage and multiple vaping modes, giving you more control over the way the device responds to each inhale.

Depending on the selected mode, the chipset can help provide a smoother ramp-up, a more powerful pulse or a longer-lasting vaping session. The display shows essential information such as wattage, battery level and resistance.

F(t), Pulse, Eco and Temperature Control Modes

The Armour Max includes several modes for different vaping preferences. F(t) mode is designed to optimise the relationship between temperature and power during the puff. Pulse mode provides a more consistent power delivery, while Eco mode can help extend battery life.

Temperature control mode is available for compatible temperature control wire types. Use this feature only with a suitable coil and follow the manufacturer's instructions before changing modes.

Top-Airflow Vaporesso iTank T

The iTank T features adjustable top airflow, allowing you to fine-tune the draw for your preferred direct-to-lung experience. Top airflow can also help reduce the chance of e-liquid escaping through the base of the tank.

Open the airflow for a looser draw and more air, or close it slightly for a more restricted inhale. Small adjustments can change the warmth, vapour volume and flavour intensity of the vape.

Easy Slide-Open Top Filling

The iTank T uses a slide-open top-fill system, allowing you to add e-liquid from the top of the tank. This makes refilling more convenient and reduces the need to remove the tank from the mod.

Close the filling section fully after adding e-liquid and check that the glass, seals and top cap are correctly fitted before using the device.

Protective TPU Armour Design

The Armour Max uses a protective TPU exterior around the mod and tank area. This design is intended to improve resistance against everyday scratches and minor knocks while giving the kit a rugged appearance.

The protective cover is not a replacement for careful handling. Avoid dropping the device, exposing it to water or using it if the battery, tank or casing has been damaged.

Uni-Lock Battery Safety System

The Uni-Lock system helps secure the battery compartment and reduces the chance of accidental opening. It also supports safer handling when the device is being carried.

Even with the locking system, switch the device off when it is not being used and carry spare batteries in a suitable battery case.

Vaporesso Armour Max iTank T Specifications

Feature	Specification
Brand	Vaporesso
Product type	Dual-battery sub-ohm vape kit
Output range	5W to 220W
Battery type	Two external 21700 or 18650 batteries
Batteries included	No, batteries sold separately
Charging	USB Type-C, DC 5V/2A
Chipset	Vaporesso AXON chipset
Display	0.96-inch TFT screen
Tank	Vaporesso iTank T
Tank capacity	6ml global version or 2ml UK TPD version
Airflow	Adjustable top airflow
Filling system	Slide-open top filling
Coil platform	Vaporesso GTi mesh coils
Modes	F(t), Pulse, Eco and temperature control
Connection	510 connection
Vaping style	Direct-to-lung
Protection	TPU protective design and Uni-Lock battery system

What Is Included with the Armour Max iTank T Version?

The Vaporesso Armour Max iTank T kit includes the Armour Max mod, an iTank T, two GTi mesh coils, a replacement glass tube, a Type-C charging cable and protective accessories.

• 1 x Vaporesso Armour Max mod
• 1 x Vaporesso iTank T
• 1 x GTi 0.2Ω mesh coil, pre-installed
• 1 x GTi 0.4Ω mesh coil
• 1 x extra glass tube
• 1 x tank protective cover
• 2 x O-rings
• 2 x 18650 battery adapter sleeves
• 1 x refilling silicone plug
• 1 x USB Type-C charging cable
• 1 x user manual and warranty card
• 1 x safety manual and reminder card

Battery cells are not included. The tank capacity can vary by regional package, with UK TPD versions supplied in a 2ml format.

GTi Mesh Coils for the Vaporesso Armour Max

GTi 0.2Ω Mesh Coil

The included GTi 0.2Ω mesh coil is designed for a powerful DTL vape and is recommended at approximately 60W to 75W. It can produce a warmer vape with increased vapour when used with suitable high-VG e-liquid.

Start at the lower end of the recommended range and increase the power gradually. Allow a new coil to saturate fully before vaping.

GTi 0.4Ω Mesh Coil

The included GTi 0.4Ω mesh coil is designed for a slightly lower-power DTL experience and is recommended at approximately 50W to 60W. It can provide a balanced combination of flavour, warmth and vapour production.

Use the wattage range printed on the coil and avoid exceeding the recommended limit. Using too much power can shorten coil life and cause a burnt taste.

GTi 0.5Ω Mesh Coil

The Vaporesso iTank T is also compatible with the GTi 0.5Ω mesh coil. This coil is designed for lower-power vaping at approximately 30W to 40W and may suit vapers who prefer a cooler DTL draw.

Check the exact GTi coil specifications before installation and make sure the selected wattage matches the coil resistance.

How to Set Up the Vaporesso Armour Max

How Do You Install the Batteries?

To install the batteries, open the Uni-Lock battery compartment and insert two compatible batteries in the direction shown inside the device. Use matched 21700 batteries or matched 18650 batteries with the supplied adapter sleeves.

1. Switch the device off.
2. Unlock and open the battery compartment.
3. Check that both battery wraps are intact.
4. Insert the matched batteries according to the polarity markings.
5. Close and lock the battery compartment securely.
6. Check the display before selecting a vaping mode.

Do not use batteries with torn wraps, dents or signs of damage. Never mix a new battery with an old battery or combine different battery brands.

How Do You Fill the iTank T?

To fill the iTank T, slide open the top-fill section, add suitable e-liquid through the fill port and close the cap securely before vaping.

1. Turn the device off before refilling.
2. Slide open the top-fill section.
3. Add e-liquid without exceeding the maximum fill line.
4. Close the top-fill section firmly.
5. Allow a new coil to soak for at least five minutes.
6. Begin at the lower end of the coil's recommended wattage range.

How Long Should You Wait Before Vaping?

Wait at least five minutes after filling a new GTi coil so the e-liquid can saturate the wicking material. Taking a puff too soon can cause a dry or burnt taste.

How Do You Change the Wattage?

Use the Armour Max controls to set the wattage within the range printed on your GTi coil. Start at a lower wattage and increase the output gradually until you find the flavour, warmth and vapour level you prefer.

How Do You Adjust the Airflow?

Use the airflow control on the iTank T to adjust the draw. Open the airflow for a looser DTL inhale with more air, or close it slightly for a warmer and more concentrated draw.

What E-Liquid Should You Use with the Armour Max?

The Armour Max and iTank T are designed for direct-to-lung vaping with low-resistance GTi mesh coils. A suitable high-VG e-liquid or shortfill is generally more appropriate for these coils than a high-strength nicotine salt e-liquid.

Choose an e-liquid that matches your coil, wattage and preferred vapour production. Follow the coil manufacturer's guidance and avoid using e-liquid that is too thick for the installed coil.

High-power sub-ohm kits can produce significantly more vapour than low-power pod devices. Choose a nicotine strength that suits your experience and vaping frequency.

Nicotine-containing e-liquid is intended for adults aged 18 and over. Nicotine is addictive. Follow the product label and use nicotine strengths responsibly.

How to Get Better Performance from the Armour Max

• Use a matched pair of 21700 or 18650 batteries.
• Carry spare batteries in a protective case.
• Prime every new GTi coil before taking your first puff.
• Use the recommended wattage range printed on the coil.
• Keep the iTank T filled above the minimum e-liquid level.
• Clean condensation from the 510 connection regularly.
• Check the tank glass and O-rings for damage or wear.
• Use Eco mode when you want to reduce battery consumption.
• Use Pulse or F(t) mode when you want a different power response.
• Replace the coil when the flavour becomes muted or burnt.
• Keep the device away from water, excessive heat and direct sunlight.
• Do not use damaged batteries, cables, coils or tank components.

When Should You Replace a GTi Coil?

Replace the GTi coil when you notice a persistent burnt taste, reduced flavour, reduced vapour production or a harsh inhale. Coil lifespan depends on wattage, e-liquid sweetness, vaping frequency and how well the coil remains saturated.

Replace the coil immediately if it is damaged or if the device produces an unusual taste after the tank has been cleaned. Always install a compatible GTi coil and allow it to prime before use.

Shop Vaporesso Vape Kits and GTi Replacement Coils

The Armour Max is designed for adult vapers who want high output, external battery flexibility and a powerful direct-to-lung setup. Explore more devices in the Vaporesso vape kits collection or compare alternative devices in the wider vape kits collection.

You can also browse the vape coils collection for replacement coils and compatible vaping hardware.

Frequently Asked Questions About the Vaporesso Armour Max Vape Kit - iTank T Version

Is the Vaporesso Armour Max Vape Kit - iTank T Version Good for Beginners?

The Vaporesso Armour Max Vape Kit - iTank T Version is better suited to experienced vapers because it uses two external batteries, delivers up to 220W and is designed for high-power DTL vaping. Beginners should understand battery safety, coil wattage and e-liquid selection before using this kit.

What Batteries Does the Vaporesso Armour Max Use?

The Armour Max uses two external 21700 batteries or two 18650 batteries with the supplied adapter sleeves. Batteries are sold separately and should be used as a matched pair with undamaged wraps.

How Much Power Does the Vaporesso Armour Max Produce?

The Vaporesso Armour Max produces between 5W and 220W of adjustable power. The correct wattage depends on the GTi coil installed in the iTank T.

What Tank Comes with the Armour Max?

The Armour Max iTank T Version comes with the Vaporesso iTank T, which features top airflow, top filling and GTi mesh coil compatibility. The tank capacity is 6ml on the global version and 2ml on the UK TPD version.

What Coils Fit the Vaporesso iTank T?

The Vaporesso iTank T uses Vaporesso GTi mesh coils. The kit includes GTi 0.2Ω and 0.4Ω mesh coils, and the tank is also compatible with suitable GTi coil options such as the 0.5Ω version.

Is the Vaporesso Armour Max a DTL Vape Kit?

Yes, the Vaporesso Armour Max is a high-power DTL vape kit. The iTank T, adjustable top airflow and GTi mesh coils are designed for direct-to-lung vaping with increased vapour production.

Does the Armour Max Come with Batteries?

No, batteries are not included. You must purchase two compatible 21700 or 18650 batteries separately and use them as a matched pair.

What E-Liquid Is Best for the Armour Max?

A suitable high-VG e-liquid or shortfill is generally recommended for the low-resistance GTi mesh coils used with the iTank T. Check the coil guidance and choose a nicotine strength that matches your experience.

How Do You Fill the Vaporesso iTank T?

Slide open the top-fill section, add compatible e-liquid through the filling port and close the cap securely. Wait at least five minutes after installing a new coil before vaping.

How Often Should You Change the GTi Coil?

Change the GTi coil when it develops a persistent burnt taste, reduced flavour, reduced vapour or a harsh inhale. Coil life varies according to wattage, e-liquid sweetness and vaping frequency.

Does the Armour Max Have Temperature Control?

Yes, the Armour Max supports temperature control with compatible wire types. Use temperature control only with suitable coils and follow the Vaporesso user manual before changing the mode.

Is the Vaporesso Armour Max Safe to Carry with Batteries Installed?

The device can be carried with batteries installed when it is switched off and the battery compartment is securely locked. Keep spare batteries in a protective case and never carry loose batteries with keys, coins or other metal objects.