Vaporesso Armour Ultra Vape Kit

Vaporesso Armour Ultra Vape Kit: 100W Rugged DTL Performance

The Vaporesso Armour Ultra Vape Kit is a powerful direct-to-lung vape kit designed for adult vapers who want long battery life, strong vapour production and durable everyday performance. Available from The British Vapes, the Armour Ultra combines a 5500mAh built-in battery with up to 100W of adjustable power and the Vaporesso iTank T.

The kit includes GTi dual mesh coils, adjustable top airflow, a slide-open top-fill tank and an easy-to-read 0.96-inch TFT screen. Its rugged mod design is certified to IP68, IP69K and MIL-STD-810H standards for water, dust and drop resistance under the specified test conditions.

• 5500mAh built-in battery
• Up to 100W adjustable output
• Vaporesso iTank T included
• GTi 0.2Ω and 0.4Ω dual mesh coils included
• Adjustable top airflow
• Slide-open top filling
• 0.96-inch TFT colour screen
• USB Type-C charging
• Boost, Pulse, Eco and temperature control modes
• IP68 and IP69K-rated mod
• MIL-STD-810H 1.2m drop-test certification for the mod
• Reinforced 510 connection
• Designed for direct-to-lung vaping

Why Choose the Vaporesso Armour Ultra Vape Kit?

Large 5500mAh Built-In Battery

The Armour Ultra features a 5500mAh built-in battery designed for extended DTL vaping. The large internal battery gives the device more endurance than many compact pod kits and reduces the need to carry spare external cells.

Battery life depends on your selected wattage, coil resistance, vaping frequency and mode. Lower-power Eco vaping will generally use less battery than high-power Boost mode.

Because the battery is built into the mod, you do not need to buy or install separate 18650 or 21700 batteries. Recharge the device through its USB Type-C port when the battery level becomes low.

Up to 100W Adjustable Power

The Vaporesso Armour Ultra produces up to 100W of adjustable power. This gives DTL vapers the flexibility to adjust the warmth, vapour production and flavour intensity to suit the installed GTi coil.

The included GTi 0.2Ω dual mesh coil is designed for approximately 60W to 75W, while the GTi 0.4Ω dual mesh coil is designed for approximately 50W to 60W. Always follow the wattage range printed on the coil.

Vaporesso iTank T with Top Airflow

The included Vaporesso iTank T is designed for direct-to-lung vaping and features adjustable top airflow. Top airflow helps provide a smooth draw and can reduce the risk of e-liquid leaking through the base of the tank.

Open the airflow for a looser inhale and increased vapour production, or close it slightly for a more restricted DTL draw. Adjust the airflow gradually until you find the right balance of flavour, warmth and vapour.

Slide-Open Top-Fill Design

The iTank T uses a slide-open top-fill design, allowing you to refill the tank from the top. This makes refilling more convenient and reduces the need to remove the tank from the mod.

Close the filling section securely after adding e-liquid and check the tank for signs of damage before use. The global iTank T is listed with a 6ml capacity, while the UK TPD version is supplied in a 2ml format.

GTi Dual Mesh Coils

The Armour Ultra includes GTi 0.2Ω and 0.4Ω dual mesh coils. Dual mesh technology is designed to heat e-liquid evenly across the coil surface, helping deliver consistent vapour and flavour during high-power vaping.

The dual mesh coils are designed for direct-to-lung vaping with suitable high-VG e-liquids or shortfills. Allow every new coil to saturate fully before vaping to help prevent dry hits and premature coil damage.

Boost, Pulse, Eco and Temperature Control Modes

The Vaporesso Armour Ultra includes several modes for different vaping preferences. Boost mode is designed for a stronger and more powerful vape, while Pulse mode provides consistent power delivery during the inhale.

Eco mode can help extend battery life by reducing power consumption. Temperature control mode is available when using a compatible coil and suitable wire type. Follow the user manual before using temperature control.

0.96-Inch TFT Colour Screen

The 0.96-inch TFT screen displays essential information such as battery level, wattage, resistance and vaping mode. The clear interface makes it easier to monitor the device while changing settings.

The screen is particularly useful when switching between the included GTi coils because each coil has a different recommended wattage range.

Rugged Armour Protection

The Armour Ultra is designed with a protective exterior and reinforced 510 connection for greater durability during everyday use. Its rugged construction makes it suitable for vapers who want a more resistant mod for outdoor use and regular carrying.

Vaporesso lists the mod as IP68 and IP69K certified and MIL-STD-810H certified for a 1.2m drop test. These certifications apply to the mod under specified test conditions. They do not mean that the complete tank and coil assembly should be submerged or exposed to high-pressure water.

Vaporesso Armour Ultra Vape Kit Specifications

Feature	Specification
Brand	Vaporesso
Product type	Built-in battery DTL vape kit
Battery capacity	5500mAh built-in battery
Maximum output	100W
Charging	USB Type-C, DC 9V/2A or 5V/3A
Display	0.96-inch TFT screen
Tank	Vaporesso iTank T dual mesh version
Tank capacity	6ml global version or 2ml UK TPD version
Included coils	GTi 0.2Ω and GTi 0.4Ω dual mesh coils
GTi 0.2Ω coil range	60W to 75W
GTi 0.4Ω coil range	50W to 60W
Airflow	Adjustable top airflow
Filling system	Slide-open top fill
Modes	Boost, Pulse, Eco and temperature control
Connection	Reinforced 510 connection
Protection ratings	IP68, IP69K and MIL-STD-810H for the mod
Dimensions	Approximately 144.5mm x 37.6mm x 31mm
Weight	Approximately 256g

What Is Included with the Vaporesso Armour Ultra?

The Vaporesso Armour Ultra kit includes the Armour Ultra battery device, an iTank T, two GTi dual mesh coils, a Type-C charging cable and replacement tank accessories.

• 1 x Vaporesso Armour Ultra battery device
• 1 x Vaporesso iTank T dual mesh tank
• 1 x GTi 0.2Ω dual mesh coil, pre-installed
• 1 x GTi 0.4Ω dual mesh coil
• 1 x USB Type-C charging cable
• 1 x refilling silicone plug
• 2 x O-rings
• 1 x extra glass tube
• 1 x extra tank protector
• 1 x user manual and warranty card

UK TPD versions are supplied with a 2ml iTank T. Check the product packaging when your order arrives to confirm the exact regional tank configuration and accessories.

GTi Coils for the Vaporesso Armour Ultra

GTi 0.2Ω Dual Mesh Coil

The included GTi 0.2Ω dual mesh coil is designed for approximately 60W to 75W and is best suited to a warmer direct-to-lung vape with increased vapour production.

Start at the lower end of the recommended range and increase the wattage gradually. The 0.2Ω coil is intended for high-power vaping, so use an e-liquid suitable for sub-ohm devices.

GTi 0.4Ω Dual Mesh Coil

The included GTi 0.4Ω dual mesh coil is designed for approximately 50W to 60W. It can provide a balanced DTL vape with strong flavour and moderate to high vapour production.

Use the recommended wattage printed on the coil and avoid exceeding the maximum setting. Excessive power can shorten the life of the coil and cause a burnt taste.

Other Compatible GTi Coils

The iTank T is compatible with additional GTi coil options, including GTi 0.5Ω mesh coils designed for lower-power vaping. Check the specifications of each replacement coil before installation.

Always confirm that the coil is compatible with the iTank T and set the Armour Ultra to the recommended wattage range.

How to Set Up the Vaporesso Armour Ultra

How Do You Fill the iTank T?

To fill the iTank T, slide open the top-fill section, add suitable e-liquid through the filling port and close the cap securely before vaping.

1. Turn the device off before refilling.
2. Slide open the tank's top-fill section.
3. Add suitable e-liquid without exceeding the maximum fill line.
4. Close the top-fill section firmly.
5. Allow a new coil to soak for at least five minutes.
6. Begin at the lower end of the coil's recommended wattage range.

How Long Should You Wait Before Vaping?

Wait at least five minutes after installing and filling a new GTi coil so the e-liquid can fully saturate the mesh. Taking puffs too soon can cause a dry or burnt taste.

How Do You Adjust the Wattage?

Use the Armour Ultra controls to set the wattage within the range printed on the installed GTi coil. Start at a lower setting and increase the power gradually until you find the preferred warmth and vapour level.

How Do You Adjust the Airflow?

Use the airflow control on the iTank T to change the draw. A more open setting provides more air and vapour, while a slightly closed setting creates a warmer and more concentrated DTL inhale.

What E-Liquid Should You Use with the Armour Ultra?

The Vaporesso Armour Ultra is designed for direct-to-lung vaping with low-resistance GTi mesh coils. A suitable high-VG e-liquid or shortfill is generally recommended for these coils and their higher power requirements.

Choose an e-liquid that matches the installed coil and your preferred vapour production. Avoid using an e-liquid that is too thick for the coil, and follow the manufacturer's guidance before use.

High-power sub-ohm kits produce more vapour than low-power pod devices. Choose an appropriate nicotine strength and avoid using high-strength nicotine e-liquid with a coil that is designed for high vapour production.

Nicotine-containing e-liquid is intended for adults aged 18 and over. Nicotine is addictive. Follow the product label and use nicotine strengths responsibly.

How to Get Better Performance from the Armour Ultra

• Prime every new GTi coil before taking your first puff.
• Use the recommended wattage range printed on the coil.
• Keep the tank filled above the minimum e-liquid level.
• Do not allow the tank to run completely dry.
• Clean condensation from the tank and 510 connection regularly.
• Check the glass and O-rings for damage before use.
• Use Eco mode when you want to reduce battery consumption.
• Use Boost mode when you want a stronger vape and more vapour.
• Replace the coil when flavour becomes muted or burnt.
• Keep the USB port cover closed when the device is not charging.
• Keep the device away from unnecessary water exposure and extreme heat.
• Do not use damaged coils, cables, glass or tank components.

When Should You Replace a GTi Coil?

Replace the GTi coil when you notice a persistent burnt taste, reduced flavour, reduced vapour production or a harsh inhale. Coil lifespan depends on wattage, e-liquid sweetness, vaping frequency and how well the coil remains saturated.

Replace the coil immediately if it is damaged or if the tank continues to leak after cleaning and checking the seals. Always install a compatible GTi coil and allow it to prime fully before vaping.

Shop Vaporesso Vape Kits and GTi Replacement Coils

The Armour Ultra is designed for adult vapers who want a powerful built-in battery, high-wattage DTL performance and rugged mod protection. Explore more devices in the Vaporesso vape kits collection or compare other devices in the wider vape kits collection.

You can also browse the vape coils collection and the coils and pods collection for replacement hardware.

Frequently Asked Questions About the Vaporesso Armour Ultra Vape Kit

Is the Vaporesso Armour Ultra Vape Kit Good for Beginners?

The Vaporesso Armour Ultra Vape Kit is better suited to experienced vapers because it is a high-power DTL device with adjustable wattage, low-resistance coils and advanced modes. Beginners should understand coil wattage, e-liquid selection and battery safety before using this kit.

What Is the Battery Capacity of the Vaporesso Armour Ultra?

The Vaporesso Armour Ultra has a 5500mAh built-in rechargeable battery. Battery life depends on wattage, coil resistance, vaping frequency and the selected operating mode.

How Much Power Does the Vaporesso Armour Ultra Produce?

The Vaporesso Armour Ultra produces up to 100W of adjustable power. The GTi 0.2Ω and 0.4Ω coils supplied with the kit operate at lower wattage ranges than the device's maximum output.

What Tank Comes with the Vaporesso Armour Ultra?

The Vaporesso Armour Ultra comes with the iTank T dual mesh tank. It features top airflow, slide-open top filling and compatibility with Vaporesso GTi coils. The global tank capacity is listed as 6ml, while the UK TPD version uses a 2ml capacity.

What Coils Fit the Vaporesso iTank T?

The Vaporesso iTank T uses Vaporesso GTi mesh coils. The Armour Ultra kit includes GTi 0.2Ω and GTi 0.4Ω dual mesh coils, and the tank supports additional compatible GTi coil options.

Is the Vaporesso Armour Ultra a DTL Vape Kit?

Yes, the Vaporesso Armour Ultra is designed for direct-to-lung vaping. Its 100W output, adjustable top airflow and GTi mesh coils are intended for larger vapour production and a more open inhale.

Is the Armour Ultra Waterproof?

The Armour Ultra mod is listed with IP68 and IP69K protection under specified test conditions. The certifications apply to the mod only, so the tank and coil should not be treated as fully waterproof. Keep the device's port cover closed and avoid unnecessary water exposure.

Is the Vaporesso Armour Ultra Drop Resistant?

The Armour Ultra mod is certified to MIL-STD-810H for a 1.2m drop test under specified conditions. This does not make the kit indestructible, so handle the mod, glass tank and coil carefully.

What E-Liquid Is Best for the Armour Ultra?

A suitable high-VG e-liquid or shortfill is generally recommended for the low-resistance GTi mesh coils. Follow the coil guidance and choose a nicotine strength appropriate for a high-power DTL device.

How Do You Fill the Vaporesso iTank T?

Slide open the iTank T top-fill section, add compatible e-liquid through the filling port and close the cap securely. Wait at least five minutes after installing a new coil before vaping.

How Often Should You Change a GTi Coil?

Change the GTi coil when it develops a persistent burnt taste, reduced flavour, reduced vapour or a harsh inhale. Coil lifespan varies according to wattage, e-liquid sweetness and vaping frequency.

Does the Vaporesso Armour Ultra Have Temperature Control?

Yes, the Armour Ultra includes temperature control mode for compatible coils and wire types. Follow the user manual and use suitable temperature control wire before activating this mode.

Does the Vaporesso Armour Ultra Have an External Battery?

No, the Vaporesso Armour Ultra uses a 5500mAh built-in battery. It does not require separate 18650 or 21700 batteries, although it must be recharged through its USB Type-C port.